Quote: Now the internal space of mobile phones has constantly been tiny, lots of mobile phones usual

1st of all, we want the P7 to be able to insert the SD card simply because he features a specific card tray along with the induction position in the SD card and also the SIM is distinct. The electrode contacts with the SIM card as well as the SD card on the mobile telephone are certainly not shared and are distributed in different positions. The two cards The golden finger has the opportunity to stagger the position and connect in the same time. So we can keep the valid part in the SIM and paste it on the SD card then study it in the similar time.

Primarily based on this notion, we ought to select the SD card with fantastic high-quality, the objective should be to steer clear of damage caused by repeated reading and writing, and must re-fit operation. recover lost partition table of the SIM card ought to also be absolutely removed, which can be a delicate manual work. Specific steps are as follows:

1. Keep in mind where the sim card and sd card really should be right after they're installed; otherwise, it can be effortless to confuse the position relationship soon after taking down the sim card. Just before removing the sim card from the plastic tray, initial check the position, it can be most effective to leave a reference for the photo, otherwise it is actually effortless to create the position connection incorrect immediately after removing it.

2. Take away the sim card, soak the NANO card with xylene or pine perfume for 5 minutes, remove the NANO card and manually peel off the plastic component from the NANO card (this method is definitely the simplest and doesn't harm the SIM card). Or use a hair dryer to blow the nanosim card, and use eyebrow pliers to carefully peel the nanosim card chip from the soft glue; the middle element from the NANO card chip can be a little convex, along with the convex part of your middle element from the transparent glue is thinned with an electric iron. Which is, so long as the transparent layer of glue on the chip is flattened somewhat bit, because you will discover six particularly thin copper wires on the chip, it is going to break should you be not cautious.

The latest nanosim card, the chip part is considerably smaller than the old card. In diskgetor partition table recovery free download is stripped out and wider, the two sides may possibly be short-circuited together with the metal frame from the card tray after installation. It can be suggested to reduce both sides 1mm to avoid both sides of your sim card Contact with all the card tray, (observe cautiously no matter if the two sides with the card are away in the metal frame) to prevent quick circuit. The sim card is very straightforward to reduce, like cloth.

three. Use AB glue to glue the sim card chip and also the sd card nicely (or use the earphone model transparent soft glue, no corrosion and no whitening. 502 glue will not be advised because it is corrosive).